BMKLW - ARMSTRONG C7/W FREEZE-PAK
- MSDS: BMKLW
- Manufacturer: BACON INDUSTRIES INC
- Product Name: ARMSTRONG C7/W FREEZE-PAK
- National Stock Number: 8040-00F020849
Product Identification
Product ID:ARMSTRONG C7/W FREEZE-PAK
MSDS Date:11/27/1985
FSC:8040
NIIN:00F020849
MSDS Number: BMKLW
Responsible Party
WATERTOWN, MA 02172
Emergency Phone: (617) 926-2550
Info Phone: (714) 863-1499
Cage: 99098
Contractor
Telephone: 617-926-2550
Cage: 99098
Ingredients
EPOXY RESIN
CAS: 25085-99-8
AMIDE
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION &
SENSITIZATION. INHALATION: IRRITATION TO MUCOUS MEMBRANES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION. SKIN: IRRITATION &
SENSITIZATION. INHALATION: MUCOUS MEMBRANES IRRITATION.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
Fire Fighting
Flash Point Method:COC
Flash Point:450F
Extinguishing Media:FOAM, DRY CHEMICAL & CO2
Fire Fighting Procedures:WEAR AN AIR SUPPLIED RESPIRATOR.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:ABSORB IN INERT MATERIAL SUCH AS SAND,
VERMICULITE, CLOTH & ETC.
Handling
Handling and Storage Precautions:TO PRESERVE FUNCTIONAL USEFULLNESS OF
THIS PRODUCT, STORE AT TEMP. OF -40F OR COLDER.
Other Precautions:AVOID CONACT W/EYES/SKIN & INHALING VAPORS.
Exposure Controls
Respiratory Protection:USE NIOSH ORGANIC FUME RESPIRATOR.
Ventilation:LOCAL EXHAUST/MECHANICAL & GENERAL
Protective Gloves:RUBBER OR PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:EYEBATH
Supplemental Safety and Health
Chemical Properties
Vapor Pres:<1
Spec Gravity:1.1
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:TAN LIQUID W/MILD AROMATIC & AMMONIA ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:NO
STRONG ACIDS
Stability Condition to Avoid:TEMPS >-40F
Hazardous Decomposition Products:CO, OXIDES OF NITROGEN, ALDEHYDES &
OTHER ORGANICS
Conditions to Avoid Polymerization:TEMPS >-40F
Disposal
Waste Disposal Methods:AFTER CURING TO A SOLID, THE MATERIAL IS
NON-HAZARDOUS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.